 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HD74LV1GT66A Analog Switch ADE-205-565B (Z) 3rd. Edition October 2000 Description The HD74LV1GT66A has an analog switch in a 5 pin package. Switch section has its enable input control (C). High level voltage applied to C turns on the switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog to digital and digital to analog conversion systems. Low voltage and high speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features * The basic gate function is lined up as hitachi uni logic series. * Supplied on emboss taping for high speed automatic mounting. * TTL compatible control input level. Supply voltage range : 4.5 to 5.5 V Operating temperature range : -40 to +85C * Control inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) * Control inputs has hysteresis voltage for the slow transition. HD74LV1GT66A Outline and Article Indication * HD74LV1GT66A Index band Marking T 9 CMPAK-5 = Control code ( or blank) * HD74LV1GT66A Marking T 9 VSON-5 = Control code Function Table Control L H H : High level L : Low level Switch OFF ON 2 HD74LV1GT66A Pin Arrangement IN/OUT 1 5 VCC OUT/IN 2 GND 3 4 Control (Top view) 3 HD74LV1GT66A Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 *1, 2 Symbol VCC VI VO I IK I OK IO I CC or IGND PT Tstg Ratings -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -20 50 25 50 200 -65 to 150 Unit V V V mA mA mA mA mW C Test Conditions Output voltage range Input clamp current Output clamp current Output : H or L VI < 0 VO < 0 or VO > VCC VO = 0 to VCC Continuous output current Continuous current through VCC or GND Maximum power dissipation at Ta = 25C (in still air) *3 Storage temperature Notes: The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C. Recommended Operating Conditions Item Supply voltage range Input voltage range Input / output voltage range Symbol VCC VI VI/O Min 4.5 0 0 0 -40 Max 5.5 5.5 VCC 20 85 Unit V V V ns / V C VCC = 4.5 to 5.5 V Conditions Input transition rise or fall rate t / v Operating free-air temperature Ta Note: Unused or floating inputs must be held high or low. 4 HD74LV1GT66A Electrical Characteristics Item Symbol VCC (V) Ta = 25C Ta = -40 to 85C Typ -- -- Max -- 0.8 V VT+ - VT- VIN = VCC or GND VC = VIH I T = 1 mA VIN = VCC to GND VC = VIH I T = 1 mA VIN = VCC, VOUT = GND or V IN = GND, VO = VCC, VC = VIL VIN = VCC or GND VC = VIH VIN = 5.5 V or GND VIN = VCC or GND V Control input only Unit Test Conditions Min Typ Max Min Input voltage VIH VIL Hysteresis voltage VH 4.5 to 5.5 4.5 to 5.5 5.0 4.5 -- -- -- -- -- -- -- 40 -- -- -- 75 2.0 -- -- -- 0.15 -- -- 100 On-state switch RON resistance Peak on resistance RON (P) 4.5 -- 50 100 -- -- 125 Off-state switch I s (OFF) leakage current On-state switch I s (ON) leakage current Input current Quiescent supply current I IN I CC I CC Control input capacitance CIC 5.5 -- -- 0.1 -- -- 1.0 A 5.5 0 to 5.5 5.5 5.5 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 3.5 4.0 0.5 0.1 -- 0.1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1.0 A 1.0 A 10 1.5 -- -- -- A mA VIN = 3.4 V pF pF pF Switch terminal CIN / OUT capacitance Feedthrough capacitance CIN-OUT 5 HD74LV1GT66A Switching Characteristics * VCC = 5.0 0.5 V Item Symbol Ta = 25C Min Propagation delay time Enable time t PLH t PHL t ZH t ZL Disable time t HZ t LZ -- -- -- -- -- -- Typ 1.0 3.0 3.0 5.0 4.0 6.0 Max 4.0 6.0 7.0 12.0 7.0 12.0 Ta = -40 to 85C Unit Test FROM TO (Output) OUT/IN Min -- -- -- -- -- -- Max 7.0 8.0 10.0 16.0 10.0 16.0 ns ns ns Conditions (Input) CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF C IN/OUT or OUT/IN or IN/OUT C IN/OUT or OUT/IN IN/OUT or OUT/IN Operating Characteristics * CL = 50 pF Item Symbol VCC (V) Ta = 25C Min Power dissipation capacitance CPD 5.0 -- Typ 4.0 Max -- pF f = 10 MHz Unit Test Conditions Test Circuit * R ON VCC VC =VIH VCC VIN =VCC (ON) GND VOUT R ON = VIN-OUT 10 -3 () + 1.0 mA - V VIN - VOUT 6 HD74LV1GT66A * I S (off), I S (on) VCC VC =VIL VCC A VIN =VCC or GND (OFF) GND VOUT =GND or VCC VIN =VCC or GND A VC =VIH VCC (ON) GND VOUT OPEN VCC * t PLH ,t PHL VCC VC =VIH VCC VIN (ON) GND VOUT CL= 15 or 50 pF VIN 10% VOUT tr 90% 90% 1.5 V 1.5 V t PLH 50% t r = t f = 3 ns tf 3V 10% t PHL GND VOH VOL 50% * t ZH ,t ZL / t HZ ,t LZ VCC VC VCC GND RL = 1k VOUT CL=15 or 50 pF S2 RL = 1k tr VC 10% 90% 1.5 V t ZH 50% VOUT t ZL 50% 90% 1.5 V tf 3V 10% t HZ VOH -0.3 V t LZ VOL +0.3 V VOH GND VCC VOL GND S1 VIN Item t ZH t ZL t HZ t LZ S1 VCC GND VCC GND S2 GND VCC GND VCC t r = t f = 3 ns 7 HD74LV1GT66A * C IN/OUT , C IN-OUT CIN-OUT VC =GND VCC VCC (OFF) CIN/OUT GND CIN/OUT 8 HD74LV1GT66A Package Dimensions Unit : mm (0.65) (0.65) (0.425) 1.3 0.2 0.15- 0.05 2.1 0.3 + 0.1 1.25 0.1 0 - 0.1 2.0 0.2 0.9 0.1 (0.2) (0.425) 5 - 0.2 0.05 Hitachi Code JEDEC EIAJ Mass (reference value) CMPAK-5 -- Conforms 0.006 g 0.50 0.50 0.12 0.05 5 - 0.2 0.05 1.6 0.05 0.55 0.05 1.60 0.05 1.20 0.05 Hitachi Code JEDEC EIAJ Mass (reference value) TNP-5D 9 HD74LV1GT66A Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://www.hitachi.com.sg/grp3/sicd http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160 Hitachi Asia Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3rd Flr, Hung Kuo Building, No.167, Tun Hwa North Road, Taipei (105) Taiwan Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Telex: 23222 HAS-TP Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7th Flr, North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 2000. All rights reserved. Printed in Japan. Colophon 1.0 10 |
Price & Availability of HD74LV1GT66A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |